SOP Templates > Custom Home Construction > Clearing and Grading (Grading 2) – Final Inspection Checklist

Clearing and Grading (Grading 2) – Final Inspection Checklist

This checklist ensures that all grading and backfilling tasks are completed to specification before the Trade Contractor leaves the site. It includes verifying the integrity of mechanicals, proper drainage, and the grading of the lot. By completing this inspection, the lot is left clean, level, and prepared for further development.

Backfill the slab and confirm all rough mechanicals are intact and undamaged

Ensure all foundation drains are clear of dirt and extend 6 inches above the top of the footings

Grade the front and backyard

Establish swales and berms

Verify that water flow direction is correct

Remove all excess dirt from the lot

Clear the lot of building debris