Roofing – Pre-Work Inspection Checklist for Home Builder

7 tasksInstallationHome Builder

This checklist ensures the site is prepared for roofing work by verifying plans, materials, and decking readiness. It confirms the site is clean, all materials are available, and OSHA-approved safety equipment is on hand. Addressing these tasks ensures a safe and efficient roofing process while reducing delays and risks.

1Review the plans——Add yours

Most tasks do not need a long instruction. Add your company’s how-to in Subtrak only when the step needs one.

2Pick up the purchase order——Add yours

Most tasks do not need a long instruction. Add your company’s how-to in Subtrak only when the step needs one.

3Clean the work area and ensure it is free of debris——Add yours

Most tasks do not need a long instruction. Add your company’s how-to in Subtrak only when the step needs one.

4Verify all materials are on site and ready to use——Add yours

Most tasks do not need a long instruction. Add your company’s how-to in Subtrak only when the step needs one.

5Ensure decking is complete, dry, and free of warped boards——Add yours

Most tasks do not need a long instruction. Add your company’s how-to in Subtrak only when the step needs one.

6Inspect windows, if installed, to confirm they are intact and undamaged——Add yours

Most tasks do not need a long instruction. Add your company’s how-to in Subtrak only when the step needs one.

7Ensure the Trade Contractor has OSHA-approved equipment on site without toe boards——Add yours

Most tasks do not need a long instruction. Add your company’s how-to in Subtrak only when the step needs one.

You found the SOP

Now make sure it actually gets done.

7 tasks is the easy part. The hard part is that six months from now the project still has to run this way when you are not the one watching.

Book a free strategy session
Jon Engquist
Jon Engquist

Founder of Subtrak · Twenty years in commercial roofing operations

“One session and this template becomes how your company actually does the work, with a name and a date on every step.”

More Installation SOPs

Keep building your playbook one process at a time.

All Home Builder SOPs
Installation9 tasks

Block Foundations – Pre-Work Inspection Checklist

This checklist ensures that all necessary preparations for block foundation work are completed before starting the job. It includes verifying materials, equipment, and the readiness of the site to meet quality and safety standards. Completing these steps ensures the foundation phase begins smoothly, aligns with project requirements, and maintains compliance with safety protocols.

View SOP
Installation18 tasks

Block Foundations – Final Inspection Checklist

This checklist ensures that the block foundation work meets all quality standards, dimensional accuracy, and project specifications before the trade contractor leaves the site. It focuses on structural integrity, finishing details, material accountability, and site cleanliness. By completing this inspection, the foundation is confirmed as ready for the next construction phase, ensuring a safe and professional result.

View SOP
Installation9 tasks

Brick Labor – Pre-Work Inspection Checklist

This checklist ensures that all necessary preparations are completed before starting work. It helps verify that materials, equipment, and the jobsite meet quality and safety standards, minimizing potential issues during construction. By completing these steps, the team ensures readiness and alignment with project specifications, safety compliance, and operational efficiency.

View SOP
Assigned to the right person
Scheduled from real milestones
Your how-to where it matters
A record that it happened

Every project runs your way. And you can see that it did.

Put a name and a date on every step, and the crew gets a reminder when their part comes up.

Book a free strategy session