Insulation – Pre-Work Inspection Checklist for Home Builder
This checklist ensures that the home is prepared for insulation installation by confirming all necessary prerequisites are complete, including inspections, site cleanliness, and the readiness of HVAC, plumbing, and electrical systems. It emphasizes sealing exterior openings, protecting fixtures, and ensuring the site is safe and accessible for efficient insulation installation.
Review the plans, including details for the finished basement
Receive or pick up the purchase order
Verify that rough inspections are complete and the house has passed inspections
Ensure the house is clean and free of debris
Inspect all windows to confirm they are intact and unbroken
Verify that exterior doors are weatherstripped and sealed
Ensure all windows are weatherstripped and sealed
Confirm the bottom plate is sill sealed
Install temporary stairs, if required
Install temporary handrails
Ensure temporary safety bracing is in place
Confirm HVAC ductwork is installed
Cover and protect ducts
Verify that plumbing pipes, tubs, and showers are installed and undamaged
Ensure electrical wiring and boxes are in place
Verify that exterior insulation and sheathing board are installed, undamaged, and repaired as needed with no gaps or missing pieces
1
Matt Richards
Completed July 17
View how-to · 5 Steps
2
Sandra Nichols
Completed July 18
View how-to · 7 Steps
3
Assign Member
July 19
View how-to · 6 Steps
4
Assign Member
July 20
View how-to · 7 Steps
Run this checklist, don't just read it.
Click Start for Free to run this checklist on your next project.
- Assign your crew
- Automate reminders
- Verify it got done right