Standard Field Installation Procedures
Review riser diagram and fixture plan
Confirm rough piping and wall backing
Confirm pipe, fittings, and test gear onsite
Review hot work and fixture handling
Mark pipe runs and stub heights
Pipe and connect per fixture and slope reqs
Use spec pipe cement and hanger spacing
Use correct pipe straps and sealants
Check pipe pitch and alignment
Inspect joints, support, and tests
Repipe or reseal leaking fittings
Clean glue, tape, pipe scraps
Valve, pressure, and slope checks
Photograph rough and final piping
👈 Use this SOP template inside Subtrak
Edit with AI. Customize in seconds. Store and share all your SOPs and checklists in one place.