Standard Field Installation Procedures
Review roof layout and spec sheets
Confirm dry deck, sheathing, and flashings
Confirm shingles, underlay, nails onsite
Conduct roof tie-off and weather hazard review
Mark roof lines, vent holes, and ridge paths
Install each layer per roofing sequence
Follow shingle, fastener, and vent install guide
Use nails, caps, and drip edges as spec’d
Check slope and shingle lines regularly
Inspect rows and flashing during roof
Re-shingle or seal misaligned areas
Clean up nails, shingles, trash
Roof walk and checklist with foreman
Photograph roof and upload to file
👈 Use this SOP template inside Subtrak
Edit with AI. Customize in seconds. Store and share all your SOPs and checklists in one place.